The product series contains 2 products.

Specifications summarized

Specifications for the 2 products in the product series. Click a HMI-no. to see all details for a single product.

Product 1 - 2
Specification/HMI-no.	147728	35900
Tension adjustable back rest upholstery	No	No
Can be used with standard wall-mounted toilets (without extension)	No	No
Possibility to change position of armrest to allow sideways transfer	Yes	Yes
Battery chargeable separated from the product	No	No
Emergency stopping function	Yes	Yes
Fold-up foot supports	Yes	Yes
Height adjustable legrests	No	Yes
Elevating legrests	No	No
Legrest position may be changed to facililtate hygiene and transfer	Yes	Yes
User weight, max (kg)	135	135
Total width (cm)	70	70
Ground clearance (cm) Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.	90	90
Width between arm supports (cm) Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.	47	47
Seat depth (cm) If the seat depth is adjustable, this is the maximum seat depth	44	44
Seat height, min (cm)	50	50
Seat height, max (cm)	100	100
Wheel diameter (mm)	12.5	12.5
Number of wheels with brake	4	4
Height of push handles/push bar, min. (cm) Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.	96	96
Height of push handles/push bar, max. (cm) Measured from the floor to the upper surface of the heigher grip with the chair in the highest position	146	146
Ingress protection class for water (IP) 0-9 (IPX0-IPX9) according to the standard for degrees of protection provided by enclosures (IEC 60529)	4	4