BUZZ Commode & Shower Chair, self-propelled



The BUZZ chairs have two 20 rear drive wheels and two 125 mm brake castors to facilitate toiletting over toilet bowls. Arm rests with PUR cushions. Also available with curved PUR-cushions. The wheels are equipped with brakes which are activated with a minimum of strength.

Classification
09 12 03 12 - Commode wheelchairs



The product series contains 2 products.

Specifications summarized

Specifications for the 2 products in the product series. Click a HMI-no. to see all details for a single product.

Product 1 - 2
Specification/HMI-no.25178109630
Tension adjustable back rest upholsteryYesYes
Can be used with standard wall-mounted toilets (without extension)NoNo
Possibility to change position of armrest to allow sideways transferYesYes
Head supportYesNo
Fold-up foot supportsYesYes
Height adjustable legrestsYesYes
Elevating legrestsYesYes
Legrest position may be changed to facililtate hygiene and transferYesYes
User weight, max (kg)150150
Total width (cm)5860.5
Ground clearance (cm)
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
4654
Width between arm supports (cm)
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
4445
Seat depth (cm)
If the seat depth is adjustable, this is the maximum seat depth
4043
Tilt-in-space forward (°)
Measured from the horizontal position.
00
Tilt-in-space back (°)
Measured from the horizontal position.
00
Number of wheels with brake22
Seat height, min (cm)5246
Seat height, max (cm)53.561
Height of push handles/push bar, min. (cm)
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
10193
Height of push handles/push bar, max. (cm)
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
101108