All product information is provided by the supplier. The National Board of Social Services is not responsible for either contents, origin, flaws and deficiencies, or any kind of damage that may occur from the use of the information. The National Board of Social Services has no authority to endorse products and does not assess the quality of the products. Hide this message.
Shower and commode chair with head support and tilt
Shower and commode chair that can be tilted in an angle between 5 to 25. The commode chair comes with a detachable bucket and lid. There are arm and leg rests, the armrests can be folded away for ease of access, the leg rests can be detached. The commode chair comes with 4 x 5 wheels, the wheels can be locked.
Classification
09 12 03 10 - Commode shower chairs with wheels and tilt, no electrical functions
The product series contains 2 products.
Click show all products to see all products belonging to the product series.
Commode chair with tilt, 50 cm seat width
HMI-no.
Article-no.
302025
Registration date
10-01-2019
Last updated
19-12-2023
Properties
Possibility to change position of armrest to allow sideways transfer
Ja, opklappelige
Properties
Height adjustable
Manuelt
Properties
Number of wheels with brake
4
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Head support
Yes
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
No
Removable legrests
Yes
Pivoting legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes
Measures
User weight, max
130
kg
Total width
61
cm
Ground clearance
45
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
50
cm
Smallest distance measured between the inside of the armrests
Seat depth
43
cm
Weight of chair
15
kg
Weight without detachable accessories (detachable without the use of tools)
Toilet opening width
19
cm
Seat height, min
54
cm
Seat height, max
59
cm
Tilt-in-space forward
5
°
Measured from the horizontal position.
Tilt-in-space back
25
°
Measured from the horizontal position.
Wheel diameter
100
mm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
104
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Centre for Testing and Certification. Test date: 08-05-2015
Test report for HMI-no. 100683
: Tested according to other national or international standard.
Test lab: Centre for Testing and Certification. Test date: 15-08-2015Test report for HMI-no. 100683
Test lab: Centre for Testing and Certification. Test date: 08-05-2015
Test report for HMI-no. 100683: Tested according to other national or international standard.
Test lab: Centre for Testing and Certification. Test date: 15-08-2015
Test report for HMI-no. 100683EU product safety regulation
No information about CE-marking
The supplier has not provided any information about CE-marking of the product. Explain CE-marking