TA Toilet/Shower lifter

This product series and all belonging products have been discontinued by Alu Rehab ApS a part of Meyra Group since 03-01-2022
TA Toilet/Shower lifter
Combined mobile electric shower/commodeSeat with cut-out for intimate hygiene and holder for bedpan. May often replace ordinary lifts. 40 cm lifting interval provides ideal working conditions for the attendant and enables the user active participation.
Vertical lift counteracts the risk of tipping over when the user transfers to standing position.

Classification
09 12 03 09 - Commode shower chairs with castors, electrical height adjustable

Documents
Brochure
User manual


The product series includes 1 discontinued product.

Product 1 of 1
TA Bade/toiletløfter m/ el-løft, højrestyret

The product was discontinued from Alu Rehab ApS a part of Meyra Group 03-01-2022


HMI-no.
31645
Article-no.
30026

Registration date
20-02-2002
Last updated
11-09-2025

Properties
Tension adjustable back rest upholstery
Yes
Can be used with standard wall-mounted toilets (without extension)
No
Battery chargeable separated from the product
No
Fold-up foot supports
Yes
Height adjustable legrests
No
Elevating legrests
No
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
100
kg
Total width
63
cm
Width between arm supports
49
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
41
cm
If the seat depth is adjustable, this is the maximum seat depth
Seat height, min
48
cm
Seat height, max
88
cm
Number of wheels with brake
4
Ingress protection class for water
5
IP
0-9 (IPX0-IPX9) according to the standard for degrees of protection provided by enclosures (IEC 60529)

Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:1999: Technical aids for disabled persons - General requirements and test methods.
Test lab: Danish Center For assistive technology. Test date: 22-07-2009 Test report for HMI-no. 31645

EU product safety regulation 
No information about CE-marking 
The supplier has not provided any information about CE-marking of the product. Explain CE-marking