All product information is provided by the supplier. The National Board of Social Services is not responsible for either contents, origin, flaws and deficiencies, or any kind of damage that may occur from the use of the information. The National Board of Social Services has no authority to endorse products and does not assess the quality of the products. Hide this message.
HTS Rifton
Classification
09 12 03 10 - Commode shower chairs with wheels and tilt, no electrical functions
Documents
The product serie includes 3 products. 3 of these products are discontinued from the supplier.
Product 1 of 3
HTS Rifton
The product was discontinued from Medema A/S, Herning-Køge 31-03-2023.HMI-no 120982 is on the market from one other supplier. Click HMI-no to see all suppliers of HMI-no 120982.
HMI-no.
Article-no.
4500-1073
Registration date
08-01-2020
Last updated
02-06-2025
Properties
Height adjustable
Hydraulik/gas
Tension adjustable back rest upholstery
Yes
Can be used with standard wall-mounted toilets (without extension)
Yes
Intended for children
Yes
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Possibility to change position of armrest to allow sideways transfer
Yes
Head support
Yes
Fold-up foot supports
Yes
Height adjustable legrests
No
Elevating legrests
No
Legrest position may be changed to facililtate hygiene and transfer
Yes
Measures
User weight, max
34
kg
Total width
67
cm
Ground clearance
78
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
30
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
28
cm
If the seat depth is adjustable, this is the maximum seat depth
Toilet opening width
48
cm
Seat height, min
51
cm
Seat height, max
78
cm
Tilt-in-space forward
-5
°
Measured from the horizontal position.
Tilt-in-space back
25
°
Measured from the horizontal position.
Number of wheels with brake
4
Wheel diameter
75
mm
Height of push handles/push bar, min.
51
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
78
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert -Prüf- und Zertifiziers. Test date: 14-01-2019
Test report for HMI-no. 120982
Test lab: Berlin Cert -Prüf- und Zertifiziers. Test date: 14-01-2019
Test report for HMI-no. 120982EU product safety regulation
No information about CE-marking
The supplier has not provided any information about CE-marking of the product. Explain CE-marking
Product 2 of 3
HTS Rifton
The product was discontinued from Medema A/S, Herning-Køge 31-03-2023.HMI-no 120984 is on the market from one other supplier. Click HMI-no to see all suppliers of HMI-no 120984.
HMI-no.
Article-no.
4500-1074
Registration date
08-01-2020
Last updated
02-06-2025
Properties
Height adjustable
Hydraulik/gas
Tension adjustable back rest upholstery
Yes
Can be used with standard wall-mounted toilets (without extension)
Yes
Intended for children
Yes
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Possibility to change position of armrest to allow sideways transfer
Yes
Head support
Yes
Fold-up foot supports
Yes
Height adjustable legrests
No
Elevating legrests
No
Legrest position may be changed to facililtate hygiene and transfer
Yes
Measures
User weight, max
68
kg
Total width
67
cm
Ground clearance
78
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
36
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
37
cm
If the seat depth is adjustable, this is the maximum seat depth
Toilet opening width
48
cm
Seat height, min
51
cm
Seat height, max
78
cm
Tilt-in-space forward
-5
°
Measured from the horizontal position.
Tilt-in-space back
25
°
Measured from the horizontal position.
Number of wheels with brake
4
Wheel diameter
75
mm
Height of push handles/push bar, min.
51
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
78
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert -Prüf- und Zertifiziers. Test date: 14-01-2019Test report for HMI-no. 120984
Test lab: Berlin Cert -Prüf- und Zertifiziers. Test date: 14-01-2019
Test report for HMI-no. 120984EU product safety regulation
No information about CE-marking
The supplier has not provided any information about CE-marking of the product. Explain CE-marking
Product 3 of 3
HTS Rifton
The product was discontinued from Medema A/S, Herning-Køge 31-03-2023.HMI-no 120985 is on the market from one other supplier. Click HMI-no to see all suppliers of HMI-no 120985.
HMI-no.
Article-no.
4500-1075
Registration date
08-01-2020
Last updated
02-06-2025
Properties
Height adjustable
Hydraulik/gas
Tension adjustable back rest upholstery
Yes
Can be used with standard wall-mounted toilets (without extension)
Yes
Intended for children
Yes
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Possibility to change position of armrest to allow sideways transfer
Yes
Head support
Yes
Fold-up foot supports
Yes
Height adjustable legrests
No
Elevating legrests
No
Legrest position may be changed to facililtate hygiene and transfer
Yes
Measures
User weight, max
113
kg
Total width
71
cm
Ground clearance
78
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
43
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
44
cm
If the seat depth is adjustable, this is the maximum seat depth
Toilet opening width
48
cm
Seat height, min
51
cm
Seat height, max
78
cm
Tilt-in-space forward
-5
°
Measured from the horizontal position.
Tilt-in-space back
25
°
Measured from the horizontal position.
Number of wheels with brake
4
Wheel diameter
75
mm
Height of push handles/push bar, min.
51
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
78
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert -Prüf- und Zertifiziers. Test date: 14-01-2019Test report for HMI-no. 120985
Test lab: Berlin Cert -Prüf- und Zertifiziers. Test date: 14-01-2019
Test report for HMI-no. 120985EU product safety regulation
No information about CE-marking
The supplier has not provided any information about CE-marking of the product. Explain CE-marking