LS 300 F

This product series and all belonging products have been discontinued by Sunrise Medical ApS since 07-03-2024
LS 300 F

Classification
12 23 06 08 - Powered wheelchairs, powered steering, class B (for indoor and outdoor use)

Documents
Brochure
User manual
Spare part catalogue


The product series includes 1 discontinued product.

Product 1 of 1
SL300

The product was discontinued from Sunrise Medical ApS 07-03-2024


HMI-no.
126120

Registration date
25-09-2020
Last updated
15-04-2026

Properties
Programmable
Yes
Elevating seat
Yes
Powered recline
Yes
Powered tilt
Yes
Powered legrests
Yes
Optional motorized attendant control
Yes
Suspension
Yes
Front-wheel-driven
Yes
Mid-wheel-driven
No
Rear-wheel-driven
No
Can be used as seat in a car
Yes

Measures
User weight, max
136
kg
External width
63
cm
Measured where widest
External length
114
cm
Maximum external length with the seat in an upright position. Measured without leg supports
Weight
168
kg
Speed, max
10
km/t
Driving distance range, fully charged
53
km
The theoretical driving distance range as calculated through laboratory testing.
Seat height, min
30
cm
The vertical distance between the floor and the seat surface measured at the front edge of the seat. Measured with the seat in the lowest position.
Seat height, max
60
cm
The vertical distance between the floor and the seat surface measured at the front edge of the seat. Measured with the seat in the highest position.
Back rest recline, max
49
°
Recline of back rest from an upright position.
Tilt-in-space forward
0
°
Measured from the horizontal position.
Tilt-in-space back
45
°
Measured from the horizontal position.
Ground clearance
6
cm
Slope, max
9
°
Climbs obstacles of max
5
cm

Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:1999: Technical aids for disabled persons - General requirements and test methods.
Test lab: TÜV Rheinland Nederland B.V. Test date: 29-04-2019 Test report for HMI-no. 126120

ISO 7176-19:2008: Wheelchairs - Part 19: Wheeled mobility devices for use as seats in motor vehicles.
Test lab: Dahl Engineering - Research and Testing Laboratory. Test date: 24-05-2018 Test report for HMI-no. 126120

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device