All product information is provided by the supplier. The National Board of Social Services is not responsible for either contents, origin, flaws and deficiencies, or any kind of damage that may occur from the use of the information. The National Board of Social Services has no authority to endorse products and does not assess the quality of the products. Hide this message.
Rubber ramps
Classification
18 24 12 03 - Threshold ramps, single-sided
Documents
The product series contains 32 products.
The product series also includes 2 discontinued products. Include discontinued products.
Product 1 of 32
Gummirampe 28 x 200 x 900 mm
HMI-no.
Article-no.
306280
Registration date
12-11-2008
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
20
cm
Width
90
cm
Threshold height, min
28
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
28
mm
The maximum height of threshold that the ramp is intended for
Load, max
300
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 50229
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 50229EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 50229Product 2 of 32
Rubberramp 10 x 100 x 700 mm
HMI-no.
Article-no.
30610L
Registration date
12-03-2013
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
10
cm
Width
70
cm
Threshold height, min
10
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
10
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 77691
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 77691EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 77691Product 3 of 32
Rubberramp 10 x 100 x 900 mm
HMI-no.
Article-no.
306100
Registration date
01-01-2001
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
10
cm
Width
90
cm
Threshold height, min
10
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
10
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 43618
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 43618EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 43618Product 4 of 32
Rubberramp 12 x 120 x 700 mm
HMI-no.
Article-no.
30612L
Registration date
12-03-2013
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
12
cm
Width
70
cm
Threshold height, min
12
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
12
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 77692
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 77692EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 77692Product 5 of 32
Rubberramp 12 x 120 x 900 mm
HMI-no.
Article-no.
306120
Registration date
01-01-2001
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
12
cm
Width
90
cm
Threshold height, min
12
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
12
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 44791
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 44791EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 44791Product 6 of 32
Rubberramp 16 x 150 x 700 mm
HMI-no.
Article-no.
30616L
Registration date
12-03-2013
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
15
cm
Width
70
cm
Threshold height, min
16
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
16
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 77694
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 77694EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 77694Product 7 of 32
Rubberramp 16 x 150 x 900 mm
HMI-no.
Article-no.
306160
Registration date
01-01-2001
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
16
cm
Width
90
cm
Threshold height, min
16
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
16
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 44792
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 44792EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 44792Product 8 of 32
Rubberramp 20 x 150 x 700 mm
HMI-no.
Article-no.
30620L
Registration date
12-03-2013
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
15
cm
Width
70
cm
Threshold height, min
20
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
20
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 77696
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 77696EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 77696Product 9 of 32
Rubberramp 20 x 150 x 900 mm
HMI-no.
Article-no.
306200
Registration date
01-01-2001
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
15
cm
Width
90
cm
Threshold height, min
20
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
20
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 44793
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 44793EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 44793Product 10 of 32
Rubberramp 24 x 150 x 700 mm
HMI-no.
Article-no.
30624L
Registration date
12-03-2013
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
15
cm
Width
70
cm
Threshold height, min
24
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
24
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 77697
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 77697EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 77697Product 11 of 32
Rubberramp 24 x 150 x 900 mm
HMI-no.
Article-no.
306240
Registration date
01-01-2001
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
15
cm
Width
90
cm
Threshold height, min
24
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
24
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 44795
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 44795EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 44795Product 12 of 32
Rubberramp 28 x 200 x 700 mm
HMI-no.
Article-no.
30628L
Registration date
12-03-2013
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
20
cm
Width
70
cm
Threshold height, min
28
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
28
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 77700
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 77700EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 77700Product 13 of 32
Rubberramp 32 x 200 x 700 mm
HMI-no.
Article-no.
30632L
Registration date
12-03-2013
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
20
cm
Width
70
cm
Threshold height, min
32
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
32
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 77703
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 77703EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 77703Product 14 of 32
Rubberramp 32 x 200 x 900 mm
HMI-no.
Article-no.
306320
Registration date
12-11-2008
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
20
cm
Width
90
cm
Threshold height, min
32
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
32
mm
The maximum height of threshold that the ramp is intended for
Load, max
300
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 50230
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 50230EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 50230Product 15 of 32
Rubberramp 36 x 200 x 900 mm
HMI-no.
Article-no.
306360
Registration date
12-11-2008
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
20
cm
Width
90
cm
Threshold height, min
36
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
36
mm
The maximum height of threshold that the ramp is intended for
Load, max
300
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 50232
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 50232EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 50232Product 16 of 32
Rubberramp 36 x 250 x 700 mm
HMI-no.
Article-no.
30636L
Registration date
12-03-2013
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
25
cm
Width
70
cm
Threshold height, min
36
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
36
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 77705
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 77705EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 77705Product 17 of 32
Rubberramp 4 x 40 x 900 mm
HMI-no.
Article-no.
306040
Registration date
26-11-2009
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
4
cm
Width
90
cm
Threshold height, min
4
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
4
mm
The maximum height of threshold that the ramp is intended for
Load, max
300
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 53720
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 53720EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 53720Product 18 of 32
Rubberramp 40 x 250 x 700 mm
HMI-no.
Article-no.
30640L
Registration date
12-03-2013
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
25
cm
Width
70
cm
Threshold height, min
40
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
40
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 77706
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 77706EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 77706Product 19 of 32
Rubberramp 40 x 250 x 900 mm
HMI-no.
Article-no.
306400
Registration date
26-11-2009
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
25
cm
Width
90
cm
Threshold height, min
40
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
40
mm
The maximum height of threshold that the ramp is intended for
Load, max
300
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 53717
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 53717EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 53717Product 20 of 32
Rubberramp 44 x 250 x 900 mm
HMI-no.
Article-no.
306440
Registration date
26-11-2009
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
25
cm
Width
90
cm
Threshold height, min
44
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
44
mm
The maximum height of threshold that the ramp is intended for
Load, max
300
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 53718
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 53718EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 53718Product 21 of 32
Rubberramp 48 x 250 x 900 mm
HMI-no.
Article-no.
306480
Registration date
26-11-2009
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
25
cm
Width
90
cm
Threshold height, min
48
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
48
mm
The maximum height of threshold that the ramp is intended for
Load, max
300
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 53719
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 53719EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 53719Product 22 of 32
Rubberramp 52 x 300 x 700 mm
HMI-no.
139532
Article-no.
30652M
Registration date
08-01-2024
Last updated
28-10-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
300
cm
Width
700
cm
Threshold height, min
52
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
52
mm
The maximum height of threshold that the ramp is intended for
Load, max
350
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Centre for Testing and Certification MECH-TEST. Test date: 04-04-2016Test report for HMI-no. 139532
Test lab: Centre for Testing and Certification MECH-TEST. Test date: 04-04-2016
Test report for HMI-no. 139532EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 139532Product 23 of 32
Rubberramp 52 x 300 x 900 mm
HMI-no.
Article-no.
306520
Registration date
30-01-2017
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
30
cm
Width
90
cm
Threshold height, min
52
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
52
mm
The maximum height of threshold that the ramp is intended for
Load, max
225
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 103647
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 103647EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 103647Product 24 of 32
Rubberramp 56 x 300 x 700 mm
HMI-no.
139533
Article-no.
30656M
Registration date
08-01-2024
Last updated
28-10-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
300
cm
Width
700
cm
Threshold height, min
56
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
56
mm
The maximum height of threshold that the ramp is intended for
Load, max
350
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Centre for Testing and Certification MECH-TEST. Test date: 04-04-2016Test report for HMI-no. 139533
Test lab: Centre for Testing and Certification MECH-TEST. Test date: 04-04-2016
Test report for HMI-no. 139533EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 139533Product 25 of 32
Rubberramp 56 x 300 x 900 mm
HMI-no.
Article-no.
306560
Registration date
30-01-2017
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
30
cm
Width
90
cm
Threshold height, min
56
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
56
mm
The maximum height of threshold that the ramp is intended for
Load, max
225
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 103648
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 103648EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 103648Product 26 of 32
Rubberramp 6 x 60 x 900 mm
HMI-no.
Article-no.
306060
Registration date
18-05-2006
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
6
cm
Width
90
cm
Threshold height, min
6
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
6
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 43623
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 43623EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 43623Product 27 of 32
Rubberramp 60 x 300 x 700 mm
HMI-no.
139534
Article-no.
30660m
Registration date
08-01-2024
Last updated
28-10-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
700
cm
Width
300
cm
Threshold height, min
60
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
60
mm
The maximum height of threshold that the ramp is intended for
Load, max
350
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Centre for Testing and Certification MECH-TEST. Test date: 04-04-2016Test report for HMI-no. 139534
Test lab: Centre for Testing and Certification MECH-TEST. Test date: 04-04-2016
Test report for HMI-no. 139534EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 139534Product 28 of 32
Rubberramp 60 x 300 x 900 mm
HMI-no.
Article-no.
306600
Registration date
30-01-2017
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
30
cm
Width
90
cm
Threshold height, min
60
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
60
mm
The maximum height of threshold that the ramp is intended for
Load, max
225
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 103649
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 103649EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 103649Product 29 of 32
Rubberramp 64 x 350 x 900 mm
HMI-no.
Article-no.
306640/306641
Registration date
20-09-2023
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
35
cm
Width
90
cm
Threshold height, min
64
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
64
mm
The maximum height of threshold that the ramp is intended for
Load, max
350
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 138552
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 138552EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 138552Product 30 of 32
Rubberramp 68 x 350 x 900 mm
HMI-no.
Article-no.
306680 / 306681
Registration date
20-09-2023
Last updated
28-10-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
35
cm
Width
90
cm
Threshold height, min
68
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
68
mm
The maximum height of threshold that the ramp is intended for
Load, max
350
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Centre for Testing and Certification MECH-TEST. Test date: 20-12-2022Test report for HMI-no. 138554
Test lab: Centre for Testing and Certification MECH-TEST. Test date: 20-12-2022
Test report for HMI-no. 138554EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 138554Product 31 of 32
Rubberramp 72 x 350 x 900 mm
HMI-no.
Article-no.
306720 - 306721
Registration date
20-09-2023
Last updated
28-10-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
35
cm
Width
90
cm
Threshold height, min
72
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
72
mm
The maximum height of threshold that the ramp is intended for
Load, max
350
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Centre for Testing and Certification MECH-TEST. Test date: 20-12-2022Test report for HMI-no. 138555
Test lab: Centre for Testing and Certification MECH-TEST. Test date: 20-12-2022
Test report for HMI-no. 138555EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 138555Product 32 of 32
Rubberramp 8 x 80 x 900 mm
HMI-no.
Article-no.
306080
Registration date
18-05-2006
Last updated
02-12-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
8
cm
Width
90
cm
Threshold height, min
8
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
8
mm
The maximum height of threshold that the ramp is intended for
Load, max
200
kg
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: centre for testing and certification. Test date: 28-05-2021Test report for HMI-no. 43617
Test lab: centre for testing and certification. Test date: 28-05-2021
Test report for HMI-no. 43617EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 43617