All product information is provided by the supplier. The National Board of Social Services is not responsible for either contents, origin, flaws and deficiencies, or any kind of damage that may occur from the use of the information. The National Board of Social Services has no authority to endorse products and does not assess the quality of the products. Hide this message.
Flipper Pro Flex
Classification
12 22 18 06 - Frames for wheelchairs
Documents
BrochureThe product series contains 2 products.
Product 1 of 2
Flipper Pro Flex, el
HMI-no.
69498
Article-no.
844201
Registration date
02-11-2011
Last updated
07-02-2025
Properties
Can be subsequently equipped with propulsion unit
No
Can be mounted on a stair climber
No
Intended for fastening in a car
Yes
Intended for children
Yes
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Height adjustable
Yes
Indoor use
Yes
Outdoor use
No
Push handles
Yes
Measures
Total width
62
cm
The narrowest possible configuration.
Total length
79
cm
Weight
35
kg
The stated weight of the wheelchair is incl. wheels and leg supports.
Load, max
75
kg
Including seat, accessories, and person.
Height, min
28
cm
Measured from the floor to the top of the adapter unit in the lowest position.
Height, max
65
cm
Measured from the floor to the top of the adapter unit in the highest position.
Tilt-in-space forward
0
°
Measured from the horizontal position.
Tilt-in-space back
30
°
Measured from the horizontal position.
Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type
EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
Product 2 of 2
Flipper Pro Flex, manuel
HMI-no.
69497
Article-no.
844200
Registration date
02-11-2011
Last updated
07-02-2025
Properties
Can be subsequently equipped with propulsion unit
No
Can be mounted on a stair climber
No
Intended for fastening in a car
Yes
Intended for children
Yes
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Height adjustable
Yes
Indoor use
Yes
Outdoor use
No
Push handles
Yes
Measures
Total width
62
cm
The narrowest possible configuration.
Total length
79
cm
Weight
30
kg
The stated weight of the wheelchair is incl. wheels and leg supports.
Load, max
75
kg
Including seat, accessories, and person.
Height, min
28
cm
Measured from the floor to the top of the adapter unit in the lowest position.
Height, max
65
cm
Measured from the floor to the top of the adapter unit in the highest position.
Tilt-in-space forward
0
°
Measured from the horizontal position.
Tilt-in-space back
30
°
Measured from the horizontal position.
Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type
EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device