All product information is provided by the supplier. The National Board of Social Services is not responsible for either contents, origin, flaws and deficiencies, or any kind of damage that may occur from the use of the information. The National Board of Social Services has no authority to endorse products and does not assess the quality of the products. Hide this message.

Comfor Incontinence cover for SAFE Med Sit wedge no. 108

Comfor Incontinence cover for SAFE Med Sit wedge no. 108
Comfor Incontinence cover with PUR surface, can be wiped off with soapy water or alcohol solution, is strong,elastic, breathable and antimicrobial
Flametest BS 7175, Crib 5
Washable up to 95Ctest 50 times
Tumble dry up to 40Ctest 50 times

Classification
18 10 06 11 - Covers



The product series contains 4 products.

Product 1 of 4
Comfor Incontinence cover for SAFE Med Sit wedge no. 108

This is cover with open backside
The cover fits other Sit wedges with same dimension

HMI-no.
101813
Article-no.
10.108CB.1

Registration date
13-06-2016
Last updated
31-03-2022

Properties
Intended for children
No
info
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Incontinence
Yes
Flame resistant
Yes
Breathable
Yes
Extensible
Yes
Machine washable
Yes

Measures
Width
40
cm
Depth
40
cm
info
Corresponding to the seat depth of the chair
Height
6
cm

Test information info
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
: Tested according to other national or international standard.
Test lab: Swerea IVF AB. Test date: 07-11-2018 Test report for HMI-no. 101813

CE-marking info
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
Medical Device Regulation (MDR) - 2017/745/EU


Product 2 of 4
Comfor Incontinence cover for SAFE Med Sit wedge no. 108

This is cover with open backside
The cover fits other Sit wedges with same dimension

HMI-no.
101814
Article-no.
10.108CB.3

Registration date
13-06-2016
Last updated
31-03-2022

Properties
Intended for children
No
info
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Incontinence
Yes
Flame resistant
Yes
Breathable
Yes
Extensible
Yes
Machine washable
Yes

Measures
Width
45
cm
Depth
40
cm
info
Corresponding to the seat depth of the chair
Height
6
cm

Test information info
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
: Tested according to other national or international standard.
Test lab: Swerea IVF AB. Test date: 07-11-2018 Test report for HMI-no. 101814

CE-marking info
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
Medical Device Regulation (MDR) - 2017/745/EU


Product 3 of 4
Comfor Incontinence cover for SAFE Med Sit wedge no. 108

This is cover with zipper on two sides and with anti-slip backside
The cover fits other Sit wedges with same dimension

HMI-no.
101815
Article-no.
108CB.1

Registration date
13-06-2016
Last updated
31-03-2022

Properties
Intended for children
No
info
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Incontinence
Yes
Flame resistant
Yes
Breathable
Yes
Extensible
Yes
Machine washable
Yes

Measures
Width
40
cm
Depth
40
cm
info
Corresponding to the seat depth of the chair
Height
6
cm

Test information info
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
: Tested according to other national or international standard.
Test lab: Swerea IVF AB. Test date: 07-11-2018 Test report for HMI-no. 101815

CE-marking info
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
Medical Device Regulation (MDR) - 2017/745/EU


Product 4 of 4
Comfor Incontinence cover for SAFE Med Sit wedge no. 108

This is cover with zipper on two sides and with anti-slip backside
The cover fits other Sit wedges with same dimension

HMI-no.
101816
Article-no.
108CB.3

Registration date
13-06-2016
Last updated
31-03-2022

Properties
Intended for children
No
info
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Incontinence
Yes
Flame resistant
Yes
Breathable
Yes
Extensible
Yes
Machine washable
Yes

Measures
Width
45
cm
Depth
40
cm
info
Corresponding to the seat depth of the chair
Height
6
cm

Test information info
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
: Tested according to other national or international standard.
Test lab: Swerea IVF AB. Test date: 07-11-2018 Test report for HMI-no. 101816

CE-marking info
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
Medical Device Regulation (MDR) - 2017/745/EU