All product information is provided by the supplier. The National Board of Social Services is not responsible for either contents, origin, flaws and deficiencies, or any kind of damage that may occur from the use of the information. The National Board of Social Services has no authority to endorse products and does not assess the quality of the products. Hide this message.
Kakadu shower and commode chair
Commode chair with 4 x 5 wheels, comes with a detachable bucket and lid. The wheels can be locked by pressing the locking pedals on each wheel. The commode has adjustable leg supports than can be detatched. The armrests can be folded away for easier access to the commode.
Classification
09 12 03 08 - Commode shower chairs with castors, non-electrical height adjustable
The product series contains 4 products.
Product 1 of 4
Kakadu shower and commode chair, seat width 38 cm
HMI-no.
Article-no.
302015
Registration date
10-01-2019
Last updated
19-12-2023
Properties
Possibility to change position of armrest to allow sideways transfer
Ja, opklappelige
Properties
Height adjustable
Manuelt
Properties
Number of wheels with brake
4
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
No
Removable legrests
Yes
Pivoting legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes
Measures
User weight, max
130
kg
Total width
49
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
38
cm
Smallest distance measured between the inside of the armrests
Seat depth
38
cm
Weight of chair
11
kg
Weight without detachable accessories (detachable without the use of tools)
Toilet opening width
17
cm
Seat height, min
50
cm
Seat height, max
55
cm
Wheel diameter
127
mm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
101
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type
EU product safety regulation
No information about CE-marking
The supplier has not provided any information about CE-marking of the product. Explain CE-marking
Product 2 of 4
Kakadu shower and commode chair, seat width 45 cm
HMI-no.
Article-no.
302018
Registration date
10-01-2019
Last updated
19-12-2023
Properties
Possibility to change position of armrest to allow sideways transfer
Ja, opklappelige
Properties
Height adjustable
Manuelt
Properties
Number of wheels with brake
4
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
Yes
Removable legrests
Yes
Pivoting legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes
Measures
User weight, max
130
kg
Total width
56
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
46
cm
Smallest distance measured between the inside of the armrests
Seat depth
43
cm
Weight of chair
14.3
kg
Weight without detachable accessories (detachable without the use of tools)
Toilet opening width
19
cm
Seat height, min
49
cm
Seat height, max
54
cm
Wheel diameter
127
mm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
101
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Centre for Testing and Certification. Test date: 22-10-2014
Test report for HMI-no. 62314
: Tested according to other national or international standard.
Test lab: Centre for Testing and Certification. Test date: 22-10-2014Test report for HMI-no. 62314
Test lab: Centre for Testing and Certification. Test date: 22-10-2014
Test report for HMI-no. 62314: Tested according to other national or international standard.
Test lab: Centre for Testing and Certification. Test date: 22-10-2014
Test report for HMI-no. 62314EU product safety regulation
No information about CE-marking
The supplier has not provided any information about CE-marking of the product. Explain CE-marking
Product 3 of 4
Kakadu shower and commode chair, seat width 50 cm
HMI-no.
Article-no.
302019
Registration date
10-01-2019
Last updated
19-12-2023
Properties
Possibility to change position of armrest to allow sideways transfer
Ja, opklappelige
Properties
Height adjustable
Manuelt
Properties
Number of wheels with brake
4
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
Yes
Removable legrests
Yes
Pivoting legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes
Measures
User weight, max
150
kg
Total width
61
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
51
cm
Smallest distance measured between the inside of the armrests
Seat depth
43
cm
Weight of chair
13.5
kg
Weight without detachable accessories (detachable without the use of tools)
Toilet opening width
19
cm
Seat height, min
49
cm
Seat height, max
54
cm
Wheel diameter
127
mm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
101
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: CBC, Warszawa, Polen. Test date: 26-01-2016Test report for HMI-no. 62315
Test lab: CBC, Warszawa, Polen. Test date: 26-01-2016
Test report for HMI-no. 62315EU product safety regulation
No information about CE-marking
The supplier has not provided any information about CE-marking of the product. Explain CE-marking
Product 4 of 4
Kakadu shower and commode chair, seat width 55 cm
HMI-no.
Article-no.
302020
Registration date
10-01-2019
Last updated
19-12-2023
Properties
Possibility to change position of armrest to allow sideways transfer
Ja, opklappelige
Properties
Height adjustable
Manuelt
Properties
Number of wheels with brake
4
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
No
Removable legrests
Yes
Pivoting legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes
Measures
User weight, max
200
kg
Total width
66
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
55
cm
Smallest distance measured between the inside of the armrests
Seat depth
43
cm
Weight of chair
14.1
kg
Weight without detachable accessories (detachable without the use of tools)
Toilet opening width
19
cm
Seat height, min
49
cm
Seat height, max
55
cm
Wheel diameter
127
mm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
101
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: CBC, Warszawa, Polen. Test date: 25-02-2014Test report for HMI-no. 100682
Test lab: CBC, Warszawa, Polen. Test date: 25-02-2014
Test report for HMI-no. 100682EU product safety regulation
No information about CE-marking
The supplier has not provided any information about CE-marking of the product. Explain CE-marking