All product information is provided by the supplier. The National Board of Social Services is not responsible for either contents, origin, flaws and deficiencies, or any kind of damage that may occur from the use of the information. The National Board of Social Services has no authority to endorse products and does not assess the quality of the products. Hide this message.
Balder Finesse 380 (tilt funktion)
Classification
12 23 06 08 - Powered wheelchairs, powered steering, class B (for indoor and outdoor use)
Documents
The product series contains 1 product.
Product 1 of 1
Balder Finesse
HMI-no.
123471
Article-no.
BF350
Registration date
26-03-2020
Last updated
21-11-2023
Properties
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Programmable
Yes
Elevating seat
Yes
Powered recline
Yes
Powered tilt
Yes
Powered legrests
Yes
Optional motorized attendant control
Yes
Suspension
No
Front-wheel-driven
Yes
Mid-wheel-driven
No
Rear-wheel-driven
No
Can be used as seat in a car
Yes
Measures
User weight, max
100
kg
External width
64
cm
Measured where widest
External length
88
cm
Maximum external length with the seat in an upright position. Measured without leg supports
Weight
140
kg
Speed, max
7
km/t
Driving distance range, fully charged
50
km
The theoretical driving distance range as calculated through laboratory testing.
Seat height, min
38
cm
The vertical distance between the floor and the seat surface measured at the front edge of the seat. Measured with the seat in the lowest position.
Seat height, max
82
cm
The vertical distance between the floor and the seat surface measured at the front edge of the seat. Measured with the seat in the highest position.
Back rest recline, max
90
°
Recline of back rest from an upright position.
Tilt-in-space forward
15
°
Measured from the horizontal position.
Tilt-in-space back
15
°
Measured from the horizontal position.
Ground clearance
7
cm
Turning diameter
180
cm
Slope, max
6
°
Climbs obstacles of max
8
cm
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
ISO 7176-19:2008: Wheelchairs - Part 19: Wheeled mobility devices for use as seats in motor vehicles.
Test lab: SP Technical Research Institute. Test date: 28-04-2014
Test report for HMI-no. 123471
Test lab: SP Technical Research Institute. Test date: 28-04-2014
Test report for HMI-no. 123471EU product safety regulation
No information about CE-marking
The supplier has not provided any information about CE-marking of the product. Explain CE-marking