Quickie Q300 M Mini SEDEO LITE



Go where others can´t with the Q300 M Mini with SEDEO LITE seating system - the narrowest (520 mm) TRUE mid-wheel drive powerchair with a turning circle of just 1100 mm. Building on its predecessor, the Salsa M2 Mini, weve taken outdoor performance to the next level with BIG powerchair features to get you further than ever before.

Classification
12 23 06 08 - Powered wheelchairs, powered steering, class B (for indoor and outdoor use)

Documents
Brochure
User manual


The product series contains 1 product.

Product 1 of 1
Quickie Q300 M MIni


HMI-no.
130255

Registration date
03-09-2021
Last updated
16-03-2026

Properties
Programmable
Yes
Elevating seat
Yes
Powered recline
Yes
Powered tilt
Yes
Powered legrests
Yes
Optional motorized attendant control
Yes
Suspension
Yes
Front-wheel-driven
No
Mid-wheel-driven
Yes
Rear-wheel-driven
No
Can be used as seat in a car
Yes

Measures
User weight, max
136
kg
External width
52
cm
Measured where widest
External length
87
cm
Maximum external length with the seat in an upright position. Measured without leg supports
Weight
103
kg
Speed, max
10
km/t
Driving distance range, fully charged
36
km
The theoretical driving distance range as calculated through laboratory testing.
Seat height, min
41
cm
The vertical distance between the floor and the seat surface measured at the front edge of the seat. Measured with the seat in the lowest position.
Seat height, max
49
cm
The vertical distance between the floor and the seat surface measured at the front edge of the seat. Measured with the seat in the highest position.
Back rest recline, max
120
°
Recline of back rest from an upright position.
Tilt-in-space forward
0
°
Measured from the horizontal position.
Tilt-in-space back
30
°
Measured from the horizontal position.
Ground clearance
4.5
cm
Slope, max
6
°
Climbs obstacles of max
7
cm

Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:1999: Technical aids for disabled persons - General requirements and test methods.
Test lab: TÜV SÜD Product Service GmbH. Test date: 15-12-2020 Test report for HMI-no. 130255

EN 12184:2014: Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods.
Test lab: TÜV SÜD Product Service GmbH. Test date: 15-12-2020 Test report for HMI-no. 130255

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 130255