All product information is provided by the supplier. The National Board of Social Services is not responsible for either contents, origin, flaws and deficiencies, or any kind of damage that may occur from the use of the information. The National Board of Social Services has no authority to endorse products and does not assess the quality of the products. Hide this message.
ZIPPIE Q300 M Mini Kids
Classification
12 23 06 08 - Powered wheelchairs, powered steering, class B (for indoor and outdoor use)
Documents
The product series contains 1 product.
Product 1 of 1
ZIPPIE Q300 M Mini Kids
HMI-no.
133197
Registration date
12-07-2022
Last updated
21-11-2023
Properties
Intended for children
Yes
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Programmable
Yes
Elevating seat
Yes
Powered recline
Yes
Powered tilt
Yes
Powered legrests
Yes
Optional motorized attendant control
Yes
Suspension
Yes
Front-wheel-driven
No
Mid-wheel-driven
Yes
Rear-wheel-driven
No
Can be used as seat in a car
Yes
Measures
User weight, max
75
kg
External width
52
cm
Measured where widest
External length
87
cm
Maximum external length with the seat in an upright position. Measured without leg supports
Weight
103
kg
Speed, max
10
km/t
Driving distance range, fully charged
36
km
The theoretical driving distance range as calculated through laboratory testing.
Seat height, min
41
cm
The vertical distance between the floor and the seat surface measured at the front edge of the seat. Measured with the seat in the lowest position.
Seat height, max
49
cm
The vertical distance between the floor and the seat surface measured at the front edge of the seat. Measured with the seat in the highest position.
Back rest recline, max
120
°
Recline of back rest from an upright position.
Tilt-in-space forward
0
°
Measured from the horizontal position.
Tilt-in-space back
30
°
Measured from the horizontal position.
Ground clearance
5
cm
Turning diameter
110
cm
Slope, max
6
°
Climbs obstacles of max
7
cm
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:1999: Technical aids for disabled persons - General requirements and test methods.
Test lab: TÜV SÜD Product Service GmbH. Test date: 15-12-2020
Test report for HMI-no. 133197
Test lab: TÜV SÜD Product Service GmbH. Test date: 15-12-2020
Test report for HMI-no. 133197EU product safety regulation
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device