All product information is provided by the supplier. The National Board of Social Services is not responsible for either contents, origin, flaws and deficiencies, or any kind of damage that may occur from the use of the information. The National Board of Social Services has no authority to endorse products and does not assess the quality of the products. Hide this message.
Motus Hemi 2.0
Motus is a foldable wheelchair, easy to fold for transport. The Motus Hemi is suitable for users who have suffered a stroke. It can be designed with an extra low seat height, making it easy to propel with your feet. It is available with single-arm drive, where both wheels can be driven from one side using double push rims.
Classification
12 22 03 11 - Manual wheelchairs, sideways foldable, standard measures
Documents
The product series contains 9 products.
Product 1 of 9
Motus Hemi 2.0, SW 35,5 cm
HMI-no.
144086
Article-no.
840000025002
Registration date
31-03-2025
Last updated
31-03-2025
Properties
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Adjustable seat angle
Yes
Balance point adjustable
Yes
Available with hard base
Yes
As opposed to sling seat
Back rest angle adjustable
Yes
Height adjustable back rest
Yes
Push handles
Yes
Front-wheel-driven
No
Intended for fastening in a car
Yes
Measures
User weight, max
140
kg
Seat height, min
36
cm
Seat height, max
55
cm
Back rest height, min
30
cm
Back rest height, max
50
cm
Total width
75.5
cm
Total length
115.5
cm
Weight
11.8
kg
The stated weight of the wheelchair is incl. wheels and leg supports.
Seat width
35.5
cm
Seat depth
36
cm
Seat depth can be increased to
54
cm
Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12183:2014: Manual wheelchairs - Requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144086
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144086
Test lab: Berlin Cert. Test date: 21-02-2018
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
Product 2 of 9
Motus Hemi 2.0, SW 38 cm
HMI-no.
144083
Article-no.
840000025002
Registration date
31-03-2025
Last updated
31-03-2025
Properties
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Adjustable seat angle
Yes
Balance point adjustable
Yes
Available with hard base
Yes
As opposed to sling seat
Back rest angle adjustable
Yes
Height adjustable back rest
Yes
Push handles
Yes
Front-wheel-driven
No
Intended for fastening in a car
Yes
Measures
User weight, max
140
kg
Seat height, min
36
cm
Seat height, max
55
cm
Back rest height, min
30
cm
Back rest height, max
50
cm
Total width
75.5
cm
Total length
115.5
cm
Weight
11.8
kg
The stated weight of the wheelchair is incl. wheels and leg supports.
Seat width
38
cm
Seat depth
36
cm
Seat depth can be increased to
54
cm
Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12183:2014: Manual wheelchairs - Requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144083
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144083
Test lab: Berlin Cert. Test date: 21-02-2018
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
Product 3 of 9
Motus Hemi 2.0, SW 40,5 cm
HMI-no.
144080
Article-no.
840000025002
Registration date
31-03-2025
Last updated
31-03-2025
Properties
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Adjustable seat angle
Yes
Balance point adjustable
Yes
Available with hard base
Yes
As opposed to sling seat
Back rest angle adjustable
Yes
Height adjustable back rest
Yes
Push handles
Yes
Front-wheel-driven
No
Intended for fastening in a car
Yes
Measures
User weight, max
140
kg
Seat height, min
36
cm
Seat height, max
55
cm
Back rest height, min
30
cm
Back rest height, max
50
cm
Total width
75.5
cm
Total length
115.5
cm
Weight
11.8
kg
The stated weight of the wheelchair is incl. wheels and leg supports.
Seat width
40.5
cm
Seat depth
36
cm
Seat depth can be increased to
54
cm
Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12183:2014: Manual wheelchairs - Requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144080
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144080
Test lab: Berlin Cert. Test date: 21-02-2018
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
Product 4 of 9
Motus Hemi 2.0, SW 43 cm
HMI-no.
144077
Article-no.
840000025002
Registration date
31-03-2025
Last updated
31-03-2025
Properties
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Adjustable seat angle
Yes
Balance point adjustable
Yes
Available with hard base
Yes
As opposed to sling seat
Back rest angle adjustable
Yes
Height adjustable back rest
Yes
Push handles
Yes
Front-wheel-driven
No
Intended for fastening in a car
Yes
Measures
User weight, max
140
kg
Seat height, min
36
cm
Seat height, max
55
cm
Back rest height, min
30
cm
Back rest height, max
50
cm
Total width
75.5
cm
Total length
115.5
cm
Weight
11.8
kg
The stated weight of the wheelchair is incl. wheels and leg supports.
Seat width
43
cm
Seat depth
36
cm
Seat depth can be increased to
54
cm
Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12183:2014: Manual wheelchairs - Requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144077
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144077
Test lab: Berlin Cert. Test date: 21-02-2018
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
Product 5 of 9
Motus Hemi 2.0, SW 45,5 cm
HMI-no.
144074
Article-no.
840000025002
Registration date
31-03-2025
Last updated
31-03-2025
Properties
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Adjustable seat angle
Yes
Balance point adjustable
Yes
Available with hard base
Yes
As opposed to sling seat
Back rest angle adjustable
Yes
Height adjustable back rest
Yes
Push handles
Yes
Front-wheel-driven
No
Intended for fastening in a car
Yes
Measures
User weight, max
140
kg
Seat height, min
36
cm
Seat height, max
55
cm
Back rest height, min
30
cm
Back rest height, max
50
cm
Total width
75.5
cm
Total length
115.5
cm
Weight
11.8
kg
The stated weight of the wheelchair is incl. wheels and leg supports.
Seat width
45.5
cm
Seat depth
36
cm
Seat depth can be increased to
54
cm
Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12183:2014: Manual wheelchairs - Requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144074
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144074
Test lab: Berlin Cert. Test date: 21-02-2018
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
Product 6 of 9
Motus Hemi 2.0, SW 48 cm
HMI-no.
144071
Article-no.
840000025002
Registration date
31-03-2025
Last updated
31-03-2025
Properties
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Adjustable seat angle
Yes
Balance point adjustable
Yes
Available with hard base
Yes
As opposed to sling seat
Back rest angle adjustable
Yes
Height adjustable back rest
Yes
Push handles
Yes
Front-wheel-driven
No
Intended for fastening in a car
Yes
Measures
User weight, max
140
kg
Seat height, min
36
cm
Seat height, max
55
cm
Back rest height, min
30
cm
Back rest height, max
50
cm
Total width
75.5
cm
Total length
115.5
cm
Weight
11.8
kg
The stated weight of the wheelchair is incl. wheels and leg supports.
Seat width
48
cm
Seat depth
36
cm
Seat depth can be increased to
54
cm
Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12183:2014: Manual wheelchairs - Requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144071
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144071
Test lab: Berlin Cert. Test date: 21-02-2018
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
Product 7 of 9
Motus Hemi 2.0, SW 50,5 cm
HMI-no.
144068
Article-no.
840000025002
Registration date
31-03-2025
Last updated
31-03-2025
Properties
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Adjustable seat angle
Yes
Balance point adjustable
Yes
Available with hard base
Yes
As opposed to sling seat
Back rest angle adjustable
Yes
Height adjustable back rest
Yes
Push handles
Yes
Front-wheel-driven
No
Intended for fastening in a car
Yes
Measures
User weight, max
140
kg
Seat height, min
36
cm
Seat height, max
55
cm
Back rest height, min
30
cm
Back rest height, max
50
cm
Total width
75.5
cm
Total length
115.5
cm
Weight
11.8
kg
The stated weight of the wheelchair is incl. wheels and leg supports.
Seat width
50.5
cm
Seat depth
36
cm
Seat depth can be increased to
54
cm
Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12183:2014: Manual wheelchairs - Requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144068
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144068
Test lab: Berlin Cert. Test date: 21-02-2018
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
Product 8 of 9
Motus Hemi 2.0, SW 53 cm
HMI-no.
144067
Article-no.
840000025002
Registration date
31-03-2025
Last updated
31-03-2025
Properties
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Adjustable seat angle
Yes
Balance point adjustable
Yes
Available with hard base
Yes
As opposed to sling seat
Back rest angle adjustable
Yes
Height adjustable back rest
Yes
Push handles
Yes
Front-wheel-driven
No
Intended for fastening in a car
Yes
Measures
User weight, max
140
kg
Seat height, min
36
cm
Seat height, max
55
cm
Back rest height, min
30
cm
Back rest height, max
50
cm
Total width
75.5
cm
Total length
115.5
cm
Weight
11.8
kg
The stated weight of the wheelchair is incl. wheels and leg supports.
Seat width
53
cm
Seat depth
36
cm
Seat depth can be increased to
54
cm
Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12183:2014: Manual wheelchairs - Requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144067
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 144067
Test lab: Berlin Cert. Test date: 21-02-2018
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
Product 9 of 9
Motus Hemi 2.0, SW 55,5 cm
HMI-no.
137030
Article-no.
840000025002
Registration date
06-06-2023
Last updated
31-03-2025
Properties
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Adjustable seat angle
Yes
Balance point adjustable
Yes
Available with hard base
Yes
As opposed to sling seat
Back rest angle adjustable
Yes
Height adjustable back rest
Yes
Push handles
Yes
Front-wheel-driven
No
Intended for fastening in a car
Yes
Measures
User weight, max
140
kg
Seat height, min
36
cm
Seat height, max
55
cm
Back rest height, min
30
cm
Back rest height, max
50
cm
Total width
75.5
cm
Total length
115.5
cm
Weight
11.8
kg
The stated weight of the wheelchair is incl. wheels and leg supports.
Seat width
55.5
cm
Seat depth
36
cm
Seat depth can be increased to
54
cm
Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12183:2014: Manual wheelchairs - Requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 137030
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
Test report for HMI-no. 137030
Test lab: Berlin Cert. Test date: 21-02-2018
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Berlin Cert. Test date: 21-02-2018
EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device