All product information is provided by the supplier. The National Board of Social Services is not responsible for either contents, origin, flaws and deficiencies, or any kind of damage that may occur from the use of the information. The National Board of Social Services has no authority to endorse products and does not assess the quality of the products. Hide this message.
Drive in-Ramp, fixed, one sided threshold ramp
The fixed Drive-In ramp is the assembly-free alternative to the double-sided ramp for doorsteps. The task of the ramp is to make small edges/thresholds passable - inside and outside. The ramp is made of non-slip aluminum checker plate and is available in the following lengths: 40, 80 and 120 cm.
Classification
18 24 12 03 - Threshold ramps, single-sided
Documents
The product series contains 3 products.
Product 1 of 3
Drive in-Ramp, fixed L: 120 cm
HMI-no.
140570
Article-no.
FE-10720
Registration date
31-05-2024
Last updated
30-09-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
120
cm
Width
75
cm
Threshold height, min
0
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
200
mm
The maximum height of threshold that the ramp is intended for
Load, max
250
kg
Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type
EU product safety regulation
EU declaration of conformity for HMI-no. 140570The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
Product 2 of 3
Drive in-Ramp, fixed L: 40 cm
HMI-no.
140564
Article-no.
FE-10718
Registration date
31-05-2024
Last updated
30-09-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
40
cm
Width
75
cm
Threshold height, min
0
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
60
mm
The maximum height of threshold that the ramp is intended for
Load, max
300
kg
Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type
EU product safety regulation
EU declaration of conformity for HMI-no. 140564The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
Product 3 of 3
Drive in-Ramp, fixed L: 80 cm
HMI-no.
140567
Article-no.
FE-10719
Registration date
31-05-2024
Last updated
30-09-2024
Properties
Outdoor use
Yes
Indoor use
Yes
Measures
Length in direction of travel
80
cm
Width
75
cm
Threshold height, min
0
mm
The minimal height of threshold that the ramp is intended for
Threshold height, max
120
mm
The maximum height of threshold that the ramp is intended for
Load, max
300
kg
Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type
EU product safety regulation
EU declaration of conformity for HMI-no. 140567The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device