All product information is provided by the supplier. The National Board of Social Services is not responsible for either contents, origin, flaws and deficiencies, or any kind of damage that may occur from the use of the information. The National Board of Social Services has no authority to endorse products and does not assess the quality of the products. Hide this message.

Barracuda wheelchair with drumbrake



The back can be adjusted between 0 and 30 degrees by pressing 2 push buttons. Depth can be adjusted from 42-48 cm.
This chair is fitted with a drumbrake so man can brake the chair from the push handles. The chair is available in different seat widths. A standard wheelchair cushion is included as standard.

Classification
12 22 03 11 - Manual wheelchairs, sideways foldable, standard measures



The product series contains 4 products. The product below meets the specified details.
Click show all products to see all products belonging to the product series.

Barracuda wheelchair with drumbrake 48 cm


HMI-no.
138922
Article-no.
272048

Registration date
26-10-2023
Last updated
30-11-2023

Properties
Intended for children
No
info
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Adjustable seat angle
Yes
Balance point adjustable
Yes
Available with hard base
No
info
As opposed to sling seat
Back rest angle adjustable
Yes
Height adjustable back rest
No
Push handles
Yes
Front-wheel-driven
No
Intended for fastening in a car
No

Measures
User weight, max
120
kg
Seat height, min
45
cm
Seat height, max
52.5
cm
Back rest height, min
43
cm
Back rest height, max
43
cm
Total width
68.3
cm
Total length
97
cm
Weight
21.3
kg
info
The stated weight of the wheelchair is incl. wheels and leg supports.
Seat width
48
cm
Seat depth
42
cm
Seat depth can be increased to
48
cm

Test information info
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12183:2009: Manual wheelchairs - Requirements and test medthods.
Test lab: Centre for Testing and Certification MECH-TEST. Test date: 04-04-2016 Test report for HMI-no. 138922

EU product safety regulation info
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device