All product information is provided by the supplier. The National Board of Social Services is not responsible for either contents, origin, flaws and deficiencies, or any kind of damage that may occur from the use of the information. The National Board of Social Services has no authority to endorse products and does not assess the quality of the products. Hide this message.
Commode and shower chair Kakadu Tilt with 24 inch rear wheel
Classification
09 12 03 12 - Commode wheelchairs
Documents
The product series contains 4 products.
Product 1 of 4
Toilet og badestol med 24 hjul sæddebredde 38cm
HMI-no.
116362
Article-no.
3020S5
Registration date
04-06-2019
Last updated
12-12-2024
Properties
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
No
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Possibility to change position of armrest to allow sideways transfer
Yes
Head support
Yes
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
No
Legrest position may be changed to facililtate hygiene and transfer
Yes
Measures
User weight, max
150
kg
Total width
57
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
38
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
38
cm
If the seat depth is adjustable, this is the maximum seat depth
Toilet opening width
17
cm
Tilt-in-space forward
0
°
Measured from the horizontal position.
Tilt-in-space back
0
°
Measured from the horizontal position.
Number of wheels with brake
4
Seat height, min
50
cm
Seat height, max
55
cm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
141
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Center for Testing and Certification, Warszawa. Test date: 26-01-2016
Test report for HMI-no. 116362
Test lab: Center for Testing and Certification, Warszawa. Test date: 26-01-2016
Test report for HMI-no. 116362EU product safety regulation
No information about CE-marking
The supplier has not provided any information about CE-marking of the product. Explain CE-marking
Product 2 of 4
Toilet og badestol med 24 hjul sæddebredde 45cm
HMI-no.
116363
Article-no.
3020S8
Registration date
04-06-2019
Last updated
12-12-2024
Properties
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
No
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Possibility to change position of armrest to allow sideways transfer
Yes
Head support
No
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
No
Legrest position may be changed to facililtate hygiene and transfer
Yes
Measures
User weight, max
150
kg
Total width
64
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
45
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
43
cm
If the seat depth is adjustable, this is the maximum seat depth
Toilet opening width
21.3
cm
Tilt-in-space forward
0
°
Measured from the horizontal position.
Tilt-in-space back
0
°
Measured from the horizontal position.
Number of wheels with brake
4
Seat height, min
50
cm
Seat height, max
55
cm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
101
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Centre for Testing and Certification. Test date: 22-10-2014Test report for HMI-no. 116363
: Tested according to other national or international standard.
Test lab: Centre for Testing and Certification. Test date: 22-10-2014Test report for HMI-no. 116363
Test lab: Centre for Testing and Certification. Test date: 22-10-2014
Test report for HMI-no. 116363: Tested according to other national or international standard.
Test lab: Centre for Testing and Certification. Test date: 22-10-2014
Test report for HMI-no. 116363EU product safety regulation
No information about CE-marking
The supplier has not provided any information about CE-marking of the product. Explain CE-marking
Product 3 of 4
Toilet og badestol med 24 hjul sæddebredde 50cm
HMI-no.
116364
Article-no.
3020S9
Registration date
04-06-2019
Last updated
12-12-2024
Properties
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
No
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Possibility to change position of armrest to allow sideways transfer
Yes
Head support
No
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
No
Legrest position may be changed to facililtate hygiene and transfer
Yes
Measures
User weight, max
150
kg
Total width
69
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
50
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
43
cm
If the seat depth is adjustable, this is the maximum seat depth
Toilet opening width
21.3
cm
Tilt-in-space forward
0
°
Measured from the horizontal position.
Tilt-in-space back
0
°
Measured from the horizontal position.
Number of wheels with brake
4
Seat height, min
50
cm
Seat height, max
55
cm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
101
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Center for Testing and Certification, Warszawa. Test date: 26-01-2016Test report for HMI-no. 116364
Test lab: Center for Testing and Certification, Warszawa. Test date: 26-01-2016
Test report for HMI-no. 116364EU product safety regulation
No information about CE-marking
The supplier has not provided any information about CE-marking of the product. Explain CE-marking
Product 4 of 4
Toilet og badestol med 24 hjul sæddebredde 55cm
HMI-no.
116365
Article-no.
3021S0
Registration date
04-06-2019
Last updated
12-12-2024
Properties
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
No
Intended for children
No
Products for children must comply with the specific demands for safety as stated in certain standards. It is the supplier of the product who has stated that the product is intended for children. The National Board of Social Services holds no responsibility in relation to this assessment.
Possibility to change position of armrest to allow sideways transfer
Yes
Head support
No
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
No
Legrest position may be changed to facililtate hygiene and transfer
Yes
Measures
User weight, max
150
kg
Total width
74
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
55
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
43
cm
If the seat depth is adjustable, this is the maximum seat depth
Toilet opening width
21.3
cm
Tilt-in-space forward
0
°
Measured from the horizontal position.
Tilt-in-space back
0
°
Measured from the horizontal position.
Number of wheels with brake
4
Seat height, min
50
cm
Seat height, max
55
cm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
101
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
Test information
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Centre for testing and certification. Test date: 25-02-2014Test report for HMI-no. 116365
Test lab: Centre for testing and certification. Test date: 25-02-2014
Test report for HMI-no. 116365EU product safety regulation
No information about CE-marking
The supplier has not provided any information about CE-marking of the product. Explain CE-marking